Pearland Roofing
Standing seam and panel
Metal Roofing in Pearland
Metal is not the usual roof in a Pearland subdivision, which is exactly why it turns up where it does: over a back porch too shallow for shingles, on an addition, or on an older house on a big lot where the owner is finished replacing shingles every couple of decades.
Two Systems, Very Different Roofs
| Standing seam | Exposed-fastener panel | |
|---|---|---|
| Fasteners | Hidden under raised seams | Screws through the panel face, with washers |
| Typical use here | Whole houses, porches, additions | Barns, shops, carports |
| Upkeep | Little | Washers age in the sun and screws need checking |
| Cost | Higher | Lower |
Before You Decide
- Check the HOA. Many deed-restricted Pearland subdivisions list approved roof materials; get it in writing before a deposit.
- Check the pitch. Every panel system states a minimum slope in its installation instructions, and a low porch roof has to meet it.
- Ask about the underlayment and the attic. Metal over a hot, poorly vented attic is still a hot attic.
- On the Brazoria County side, ask whether the system has the product approval needed for a TDI windstorm certificate, if you want one.
About the Noise
Over solid decking and underlayment, the way a house is normally roofed, rain on metal is not the barn-roof drum people expect. Over open framing on a porch, it is louder. That is a design choice worth talking through.
Considering Metal?
Tell us whether it is the whole house, a porch or an addition. The contractor will say whether metal is the right call for it.
Call (346) 271-5264 Ask for a Free Roof Review